Sungrow Logger1000, Руководство пользователя

Страница: 52 / 94

42
7.8.1.6 Add the Third-party Meter (Custom)
step 1 Click Device→Device List to enter the corresponding interface.
step 2 Click Add Device , select Meter option in the Device Type .
step 3 Select the port (COM1/COM2/COM3/NET) that the meter is actually connected to in the
Port .
step 4 Select Others option in the Device Model .
step 5 Select Custom option in the Configuration Method . Click Next to enter Configure
Measuring Point the interface.
table 7-1 Parameter description
Parameter
Description
Byte Order
Refer to the communication protocol of the meter, parse
the order of the read byte stream
PT Transformation Ratio
Refer to the communication protocol of the meter, voltage
transformation ratio
CT Transformation Ratio
Refer to the communication protocol of the meter, current
transformation ratio
Beginning Address The beginning address of the device
Quantity of Device
The number of the meter
Debug Address
The device address to be read when click Read-Back , the
range is [(“Beginning Address”), (“Beginning Address” +
”Quantity of Device”-1)]
Modbus Address
Refer to the communication protocol of the meter, the
address of Modbus communication protocol, priority to
select the register address corresponding to the data type
of “Float”
Register Type
Refer to the communication protocol of the meter, the
register type of the corresponding measuring point
Data Type
Refer to the communication protocol of the meter, the data
type of the corresponding measuring point
Read Type
With or without framing when send messages at this point,
recommend to choose continuous type
Coefficient
Refer to the communication protocol of the meter, the
coefficient that multiplied the value of the data read
Read-back Value
The value of the selected measuring point read when
clicking
Read-back
The user can select up to 21 objects for setting. Their corresponding parameters
such as Modbus address please refer to the user manual of the connected meter.
7 WEB Interface User Manual