Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 318

vi Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004
5.3.1 Out-of-Band Connection 5–6
5.4 Configuration Overview 5–7
5.4.1 Point-to-Point Configuration Guidelines 5–9
5.4.2 A SAN Point-to-Point Configuration Example 5–11
5.4.3 A DAS Loop Configuration Example 5–15
5.4.4 Larger Configurations 5–18
5.5 Initial Configuration Steps 5–18
5.5.1 Viewing the Initial Firmware Windows 5–19
5.5.2 Checking Available Physical Drives 5–20
5.5.3 Configuring FC Channels as Host or Drive (Optional) 5–22
5.5.4 Choosing Loop or Point-to-Point Fibre Connection 5–24
5.5.5 Editing and Creating Additional Host IDs (Optional) 5–25
5.5.6 Selecting Sequential or Random Optimization 5–27
5.5.6.1 Maximum Number of Disks and Maximum Usable
Capacity for Random and Sequential Optimization
5–28
5.5.7 Reviewing Default Logical Drives and RAID Levels 5–29
5.5.8 Completing Basic Configuration 5–31
5.5.9 Creating Logical Drives (Optional) 5–31
5.5.10 Preparing for Logical Drives Larger Than 253 Gbyte 5–38
5.5.11 Changing a Logical Drive Controller Assignment (Optional) 5–39
5.5.12 Creating or Changing a Logical Drive Name (Optional) 5–41
5.5.13 Partitioning a Logical Drive (Optional) 5–42
5.6 Mapping Logical Drive Partitions to Host LUNs 5–45
5.6.1 Planning for 1024 LUNs (Optional, Loop Mode Only) 5–47
5.6.2 First Steps in Mapping a Partition to a LUN 5–48
5.6.3 Using the Map Host LUN Option 5–50
5.6.4 Setting Up Host Filter Entries 5–52
5.6.4.1 Creating Host Filter Entries 5–53