Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 318

xv
Figures
FIGURE 1-1
Sun StorEdge 3510 FC Array Front View 1–1
FIGURE 4-1
Front Bezel and Front Bezel Locks of an Array 4–2
FIGURE 4-2
Sequence of Steps to Change Front Bezel Locks So Keys Cannot Be Removed 4–3
FIGURE 4-3
Hardware Connections on the Back of a Dual-Controller FC Array 4–5
FIGURE 4-4
Installed Cord Lock 4–7
FIGURE 4-5
Front Panel With LEDs Displayed 4–9
FIGURE 4-6
Dedicated Drive Channels 2 (on the Upper Controller) and 3 (on the Lower Controller) in a
Dual-Controller Array
4–11
FIGURE 4-7
Host Channels on a Dual-Controller Array 4–11
FIGURE 4-8
Default Dual-Controller SFP Placement 4–12
FIGURE 4-9
Default Single-Controller SFP Placement 4–12
FIGURE 4-10
Default JBOD Expansion Unit SFP Placement 4–13
FIGURE 4-11
Typical SFP Connector Used to Connect Cables to Chassis SFP Ports 4–13
FIGURE 4-12
RAID Array Attached to Two Hosts and Two Expansion Units 4–18
FIGURE 4-13
Front Bezel and Front Bezel Locks of an Array 4–20
FIGURE 4-14
ID Switch Located on the Left Front Side of the Array or Expansion Unit 4–21
FIGURE 5-1
A Point-to-Point Configuration With a Dual-Controller Array and Two Switches 5–13
FIGURE 5-2
A DAS Configuration With Four Servers, a Dual-Controller Array, and Two Expansion
Units
5–16
FIGURE 5-3
Firmware Main Menu 5–20
FIGURE 5-4
Example of an Allocation of Local and Spare Drives in Logical Configurations 5–32