Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 273 / 318

Appendix H Configuring a Linux Server H-3
c. If E is not correct, press the letter E and the cursor goes to line
E
. Backspace and
change the line to:
After you edit the line, press Return and the cursor goes back to the line
Change
which Settings?
d. Set F to no. When pressing F, toggle from yes to no or vice versa.
e. Set G to no. When pressing G, toggle from yes to no or vice versa.
f. Press the Esc key to return to the configuration screen.
g. In the configuration menu, highlight “Save setup as dfl” using the arrow keys
and press Return.
A “configuration saved” confirmation message is displayed.
h. Highlight “Exit from Minicom” in the configuration menu, and press Return.
H.2 Accessing the Firmware Application
From a Linux Server
After you have set the Minicom serial port parameters, use the Minicom utility to
access the controller firmware with the following steps:
1. To start the Minicom program from the terminal window, type:
A pop-up window stating “Initializing Modem” appears. When initialization is
complete, the following banner is displayed:
Welcome to Minicom 2.00.0
Options: History Buffer, F-Key Macros, Search History Buffer, I18n
Compiled on Jun 23 2002, 16:14:20.
Press “CTRL-A” Z for help on special keys.
2. Press Ctrl-l to connect to the array and access the firmware application.
38400 8N1
minicom