Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 147 / 318

Chapter 6 Checking LEDs 6-7
Note –
The Sun StorEdge 3510 FC array’s Ethernet link LED differs from that found
on a Sun StorEdge 3310 SCSI array. A connected port’s Ethernet link LED glows
solid amber only on the active controller, because a FC port is considered active only
if its controller is active. On an inactive controller, a port’s Ethernet link LED is off
whether it is connected or not. The absence of a solid amber light on a connected
port’s Ethernet link LED for a connected port indicates that this controller is not the
active controller.
Note – An SFP link status (L) LED is off if there is no connection, or a failed
connection, to this SFP.
Note –
To test that the LEDs work, using a paperclip, press and hold the Reset
button for 5 seconds. All the LEDs should change from green to amber when you
perform this test. Any LED that fails to light indicates a problem with the LED.
When you release the Reset button, the LEDs return to their initial state.
RAID controller Status of controller
on I/O controller
module Blinking green – Good (primary controller)
Solid green – Good (secondary controller)
Solid amber – Failed RAID controller or I/O
module
SFP link (L) SFP link status Solid green – Active good FC Connection
Off – Empty or failed FC connection
SFP speed (S) SFP speed status Solid green – 2 Gbit
Off – 1 Gbit
TABLE 6-3
I/O Controller Module and Battery Module LEDs (Continued)
LED Purpose LED Color Definition