Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 318

Contents v
4. Connecting Your Fibre Channel Array 4–1
4.1 Converting Your Front Bezel Locks So the Keys Cannot Be Removed 4–2
4.2 Fibre Channel Array Connections 4–5
4.3 Connecting the Chassis to an AC Power Outlet 4–6
4.4 Connecting the Chassis to DC Power Outlets 4–7
4.5 Powering Up and Checking LEDs 4–9
4.6 Reviewing and Changing SFP Ports (Optional) 4–10
4.6.1 Port Connectivity in a Dual-Controller Array 4–10
4.6.2 Default SFP Placement 4–11
4.6.3 Changing Your SFP Configuration 4–13
4.7 Configuring a COM Port to Connect to a RAID Array 4–14
4.8 Setting an IP Address 4–14
4.9 Setting Up Out-of-Band Management Over Ethernet 4–16
4.10 Cabling to Expansion Units 4–17
4.10.1 Scaling Beyond 36 Disks 4–19
Note – Limitations 4–19
4.11 Setting Loop IDs on Expansion Units 4–20
4.12 Connecting Ports to Hosts 4–23
4.13 Power-On Sequence 4–23
5. First-Time Configuration 5–1
5.1 Controller Defaults and Limitations 5–2
5.1.1 Planning for Reliability, Availability, and Serviceability 5–2
5.1.2 Dual-Controller Considerations 5–3
5.1.3 Single-Controller Considerations 5–4
5.2 Battery Operation 5–4
5.2.1 Battery Status 5–4
5.2.2 Write-Back and Write-Through Cache Options 5–6
5.3 Software Management Tools 5–6