Sun Microsystems StorEdge 3000 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 301 / 318

Appendix J Configuring an HP Server Running the HP-UX Operating Environment J-11
2. To include the file system created in the example, add the following line to the
file
/etc/fstab
:
See the entry for
fstab
(4) for details on creating
/etc/fstab
entries.
3. To check to see if
fstab
was set up correctly, type:
If the mount point and the
fstab
file are correctly set up, no errors appear.
4. To verify that the file system is mounted and list all mounted file systems, type:
5. To unmount the file system, type:
J.12 Determining the World Wide Name for
HP-UX Hosts
Before you can create host filters, you need to know the world wide name (WWN)
for the FC HBA that connects your host to your FC array.
For supported HP-UX host HBAs, follow these steps:
1. Determine the device name by typing the command:
/dev/vg0mynewvg/lvol1 /usr/local/myfs vxfs delaylog 0 2
# mount -a
# bdf
# umount /usr/local/myfs
# ioscan -fnC fc