(Info-Traçabilité) Modification sulky 00 vers 01
Directives pour TRADUCTION SE
À AJOUTER ou À TRADUIRE
À SUPPRIMER
À VÉRIFIER
f
orward
Speed
SettiNGS
to
Be
doNe
oN
the
viSioN
coNSole
- Select the menu
- Select the
function.
- Choose sensor No. 5 with
- Validate with
and a No. 6 is now displayed
- This No. 6 allows a minimum speed limit to be
determined. When under this limit, the speed considered
automatically reverts to zero. By default this value is 2
km/h.
- It is now OK, you do not have to calibrate over 100 m, the
speed is automatically correct.
Note
It is possible to link the VISION console to various guidance
systems; for each solution you must use a suitable cable.
For each solution you must perform the corresponding set-
tings on the guidance console and on the VISION console.
Contact your dealer for information.
If a cable that is not referenced by the manufacturer is used,
there is a possible risk of irreversible damage to the VISION
console.
In case of any damage caused by using a non-referenced
cable, the manufacturer’s warranty will automatically
become invalid.
34
35
GB
SE
A
A
Programming / Programmering
Programming / Programmering
2
A
c)
