Suez Sievers UPW Boron Analyzer, Руководство по эксплуатации и обслуживанию

Страница: 62 / 104

SUEZ © 2018 62 of 104 DLM 71000-03 EN
Rev. B
Chapter 5: System Configuration
MESSAGES
This option will print out the message log, containing the error and warning messages and their number of
occurrences during the life of the Analyzer.
CAL. CONSTANTS
This option will print the calibration constants for the Analyzer.
SYSTEM CONFIG
This option will print the system configuration of the Analyzer.
SYSTEM CONST
This option prints the system constants for the conductivity cell of the Analyzer.
MAINTENANCE
This option will print the maintenance status of the five maintenance items.
To print any of these options:
1. Use the UP and DOWN arrow keys to highlight the desired option and press PRINT .
2. Press EXIT to return to the Main Menu .
Main Menu: Started State Options
When the Analyzer is performing a mode of operation it is in the started state and the Main Menu options
are different, as shown in Figure 11. Note that the START key has been replaced with a STOP key and the
SETUP key has been replaced with a TOOLS key. Pressing VIEW , INFO or PRINT has the same function
as previously discussed.
Figure 11: Front Panel Display showing the Main Menu in the Started State