Suez Sievers UPW Boron Analyzer, Руководство по эксплуатации и обслуживанию

Страница: 52 / 104

SUEZ © 2018 52 of 104 DLM 71000-03 EN
Rev. B
Chapter 5: System Configuration
Figure 10: Front Panel Display Showing the Main Menu in the Stopped State
START
Press to begin the mode of operation displayed.
VIEW
Press to display the six available options: BORON, CAL/VERIFY HIST, MAINTENANCE, SYSTEM
CONFIG, MESSAGES, and DEBUG.
BORON
The BORON option is used to view the Boron Data. To access the BORON screen:
1. Press View from the Main Menu to enter the View menu.
2. Use the UP and DOWN arrow keys to highlight BORON .
3. Press ENTER to display stream number options.
4. Highlight the appropriate stream and press ENTER to display the options for each stream.
5. Press ENTER while the BORON DATA option is highlighted to display the most recent data for the
stream.
• Up to twenty-four historical values are displayed as text.
• The data is displayed with appropriate units and time measured.
• The date when the data was measured is in the upper-right corner.
• Three significant figures are displayed.
• Use the UP and DOWN arrow keys to advance through measurements.
• The most recent data is displayed in the upper-left position of the values displayed.
• If the UP or DOWN arrow key is held, data advances one page at a time.
• If the data is viewed during analysis, a newly acquired data point will update the screen at the
upper-left position.
• The date of the measurement will also be replaced with the countdown time left in analysis in
the upper-right corner.