Stratasys 180-00108 uPrint Скачать руководство пользователя страница 61

Страница: 61 / 68

Stratasys Document Number 206465-0001

Troubleshooting and Maintenance

Figure 41: Identifying Tips

2. Place the tip shield on the tip.

3. With gloved hand, insert the new tip into the heater block. The slotted side towards the rear of the

printer.

4. Use needle nose pliers to grasp the stainless steel shield of the tip.

5. Pull the tip shield toward you, then lift up to install the tip.

6. Push the tip toward the back of the printer once it is all the way up against the heater block.

7. Verify the tip is fully inserted into the heater block and that the stainless steel shield is aligned (See

Figure 42

8. Use 7/64 T-Handle Allen wrench to firmly tighten the heater block clamp screws.

Note:

Make sure the tip remains all the way up against the heater block
as you tighten the screws.

Figure 42: Installing tips

Support Tip

Model Tip

Left Side

Right Side

Tighten screws

Push tips into
position

Содержание 180-00108 uPrint





































































Результаты поиска

Содержание 180-00108 uPrint

Отзывы:

Stratasys 180-00108 uPrint, Руководство пользователя, Страница: 61 / 68

Результаты поиска

Содержание 180-00108 uPrint

Отзывы: