Stratasys 180-00108 uPrint Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 68

Stratasys 180-00108 uPrint Скачать руководство пользователя страница 35

Stratasys Document Number 206465-0001

Operation

35

CatalystEX Overview

This is a brief overview of the sections in the CatalystEX software.

•

General tab: This section is where you can select the type model fill and support fill. You can also
change the STL units and STL scale in this section.

•

Orientation tab: This section allows you to rotate and resize your parts. You can also change the
view and auto orient your part or insert a pause.

•

Pack tab: This section shows you which parts are in the pack for printing. You can add parts, move
the parts around to make a better fit or clear the pack from this section.

•

Printer Status tab: This section shows you the amount of material remaining for both model and
support as well as which parts are in the Build Queue.

•

Printer Services tab: From this section you can check the printer history, set the printer time, set
the printer password, update printer software, get printer info and export configuration files.

Figure 24: CatalystEX hierarchy

Note:

For detailed information about the many file processing options
available in CatalystEX, refer to CatalystEX Dynamic Help.

For more information about STL files, CMB files, part orientation,
modeling envelope placement, print “job” efficiency and other
print controls, refer to the CatalystEX Dynamic Help.

CatalystEX

General Tab

Orientation Tab

Pack Tab

Printer Status Tab

Printer Services Tab

• Auto orientation
• Part rotation
• STL scale
• Change views
• Insert Pause

• Insert CMB file
• Pack name
• Clear pack

• Printer status
• Job queue
• Manage queue

• Printer history
• Export configuration
• Printer time
• Printer password
• Printer information
• Update software

• Layer resolution
• Model interior
• Support fill
• Number of copies
• STL units
• STL scale

«
...
33
34
35
36
37
...
»

Содержание 180-00108 uPrint





































































Отзывы:

Нет отзывов