Stratasys 180-00108 uPrint, Руководство пользователя, Страница: 42 / 68

Stratasys Document Number 206465-0001
Operation 42
2. Empty the purge bucket.
3. Place the purge bucket over the 2 mounts and push down to lock in place.
Replacing material for single material bay
Removing material from the printer:
1. From the display panel press Material... The display will show Add/Remove and S1(remaining%)
and M1(remaining%) . Asterisks will mark the currently active material bays (the material bays that are
currently loaded to the head).
2. Press Unload...
3. Press Unload both , Unload Model or Unload Support , depending on which you need to replace.
4. The printer will now unload material from the head. When the material has unloaded, you will need to
replace the material carriers.
5. Once the material carriers have been replaced press Load...
6. Press Load Model, Load Support or Load both depending on which material you are replacing.
7. After material has been loaded to the head press Done... the display will show Wait for Part or Ready
to Build (if a part is in the queue) and will also show the amount of material remaining in the model
and support carriers.
Replacing material for dual material bays
Removing material from the printer:
1. From the display panel press Material... The display will show Add/Remove and S1%,
S2 (remaining%) and M1, M2 (remaining%). Asterisks will mark the currently active material bays (the
material bays that are currently loaded to the head).
2. Press Unload...
3. Press Unload both , Unload Model or Unload Support , depending on which you need to replace.
4. The printer will now unload material from the head. When the material has unloaded, you will need to
replace the material carriers.
5. Once the material carriers have been replaced press Load...
6. You can change which carriers you want to load at this time by selecting Next Model or Next Support .
When done selecting which material bays will be loaded, press Load Selected .
7. The printer will now load the selected material bays and prepare the other bays for automatic loading.
After they are done loading and preparing, press Done... the display will show Wait for Part or Ready
to Build (if a part is in the queue) and will also show the amount of material remaining in the model
and support carriers.
CAUTION
When reinstalling the purge bucket, make sure that it locks on both mounts
and hangs flush with the chamber wall to avoid damage.