manualshive.com logo in svg

Stratasys 180-00108 uPrint, Руководство пользователя, Страница: 15 / 68

Поделиться
Скачать
Stratasys 180-00108 uPrint Скачать руководство пользователя страница 15

Stratasys Document Number 206465-0001

Setup

15

Safety

uPrint

 is designed to be a safe and reliable 3D printer. However, normal operation will require that you 

access areas of the printer that are potentially hazardous. 

Hazard Classifications:

Please be aware of the following hazard classifications that are used throughout this guide.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, 

may result in minor or moderate injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, 

could result in serious injury.

Hot Surface:

 

The hot surface sign indicates the presence of devices with high 

temperatures. Always use extra care, and wear safety gloves, when 
working around heated components

Gloves: When performing some maintenance procedures, the machine may be 

hot and gloves will be required to avoid burns.

Safety Glasses: Wear safety glasses to avoid injury to your eyes.

Lifting Hazard: Lift with two or more people to avoid serious injury.

Recycle: Use proper recycling techniques for materials and packaging.

ESD: Use standard electrostatic discharge (ESD) precautions 

when working on or near electrical circuits.

Содержание 180-00108 uPrint





































































Отзывы:

Нет отзывов