Stratasys 180-00108 uPrint, Руководство пользователя, Страница: 39 / 68

Stratasys Document Number 206465-0001
Operation 39
Chamber Lights
When a part starts to build, the chamber lights are automatically ON. You can toggle the lights ON or OFF
through the display panel.
You can also turn the light on permanently.
To set the chamber lights to always on:
1. From Idle or Ready to Build, on the display panel press Maintenance .
2. Press Setup .
3. Press Lights Always On .
Repeat this process to turn this option off.
Pausing a build
While building a part, you may want to pause the build to allow for material replacement. To pause the
build at any time, from the display panel press
Pause .
Note:
When the build process is paused, the printer completes the
current tool path before pausing.
Resuming a build that has been paused
If you have pressed Pause , and are ready to resume building the part, press Resume and the printer will
resume printing.
Canceling a build
You can cancel a build at any time while the part is building.
Cancel a build:
1. From the display panel press Pause .
2. Once the printer stops building, press Cancel Build .
3. The display will ask Are you Sure? Press Yes .
4. The display will show Build Stopped followed by the file name. You will then be prompted to remove
the part and replace the modeling base.
5. Remove the part and replace the modeling base. Once the chamber door has been opened and
closed, the display will ask Part Removed? Press Yes ONLY after you have removed the part and
replaced the modeling base.
CAUTION
If you press Yes before removing the part, the printer can be damaged.