Storz 11302 BDX, Инструкция по эксплуатации

Страница: 27 / 64

Attaching the Monitor to a Holder
Press the holder together to allow the stand bar to be pushed through the openings.
Release the holder in the desired position. The selected position is fixed by the holder’s basic tension.
The optionally available clamp 8401 YB (see accessories) can similarly be secured to the VESA 75 holder and is
used to attach the electronic module to rods with a diameter of less than 25 mm and/or to rails with a cross section of
less than 25 mm.
System Reset
If a system error occurs (unit no longer reacts, although connections and power supply are in order), a system reset
has to be implemented. This is the equivalent of rebooting a computer. For this, a thin screwdriver or similar is
inserted into the round opening next to the SD card holder
h
and carefully pushed downward in order to activate the
reset button g .
The system will now be rebooted.
Monitor Bag 8403 YD
The optionally available protective bag 8403 YD facilitates the mobile use of the monitor.
Installation and Operating
Instructions
27