Storch Airless SL 1600 HD, Руководство пользователя

Страница: 212 / 268

212
Assembling the pump
9.
Before starting assem-
bly work soak all leather
packing pieces in SAE-30
W oil for at least 1 hour.
Add the support ring (204)
to the piston rod. Add
UHMWPE (208) and lea-
ther packing pieces (218)
alternately to the piston
rod - pay attention to ali-
gnment! Install the counter
ring (217). Add the piston
10.
Insert the ball (206) into
the piston rod. If LOCTITE
has been applied to the
piston valve thread, make
sure the ball does not
come into contact with any
LOCTITE.
11.
Tighten the piston valve to
the piston rod as specified:
tighten with 36.6 +/- 4
Nm (model 248204,
253056)
tighten with 74.6 +/- 4
Nm (model 248205,
259057, 249059)
12.
Before starting assem-
bly work soak all leather
packing pieces in SAE-
30 W oil for at least 1
hour. Add the support ring
(204) to the cylinder. Add
UHMWPE (203) and lea-
ther packing pieces (223)
wiper (216) (pay attention
to alignment!) and rein-
forcing plate (229) to the
piston valve (210). The
special sealing stain on
the piston valve thread is
sufficient for four packing
changes. Apply LOCTITE
to the piston valve thread
after the packing pieces
have been changed four
times.
alternately to the cylinder
- pay attention to align-
ment! Apply the counter
ring (224) to the top of the
cylinder. Press the packing
pieces together.
13.
Insert the seal (201) into
the packing nut (202).
Install the spacer (228)
for neck adjustment on
the packing nut. Fit the
packing nut loosely in the
cylinder.
14.
Grease the piston packing
pieces.
CAUTION
Do not slide the piston up
into the bushing, as this
may damage the piston
packing.
Original instruction