StorageWorks RW551, Руководство по обслуживанию

Страница: 63 / 184

Chapter 4. Troubleshooting and Diagnostics
EK–MOL80–SV. B01 4–13
Table 4–2 Operation Errors (
continued )
Task Problem/Symptom What to do
The unit's power failed
while a disk was in the
drive.
•
Power cycle the unit.
•
If power on is
unsuccessful, power
the unit off. Do not
move the unit. Moving
the unit with a disk in
the drive risks
damaging the
magneto-optical
mechanism in the MO
drive. Refer to the
"Powering On" and
"Power Fail" sections
earlier in this table.
•
If it is critical that the
disk be removed from
the drive before power
can be restored to the
drive, see "Using the
Eject Tool to Remove
a Disk from the Drive"
in this chapter.
Running a test Started a test and need to
stop the test.
•
Press CANCEL. The
current test loop
continues until it is
finished; then the test
stops.
Normal operation INIT ELEM (Initialize
Element) displays.
•
Power cycle the
jukebox. Do not power
cycle the jukebox until
all other peripherals on
the SCSI bus are
turned off. Removing
power from the
jukebox when other
devices are active on
the SCSI bus may
cause data loss and/or
other problems with
the SCSI interface.