StorageWorks RW551, Руководство по обслуживанию, Страница: 24 / 184

Chapter 2. Environmental/Installation/PM
EK–MOL80–SV. B01 2–3
If the unit is damaged, it will be repaired or replaced. The cause of damage will
be determined by the field service representative.
Problems determined to be caused by factory packaging should be reported, in
detail, to the factory so a warranty claim can be submitted.
Be sure to include the product number and full serial number in any
correspondence with Digital concerning the unit.
Unpacking and Taking the Jukebox Off the Pallet
Using a floor jack, move the jukebox to the chosen location.
Remove the outer packaging by following the instructions printed on the carton.
Tools Required
•
1/2-inch open-end wrench (for adjusting the leveler feet)
•
9/16-inch wrench (to remove the bolts that clamp the feet to the pallet)
1. Remove the ramp from the top of the protective foam pads that cover the top
of the jukebox.
2. Attach the ramp to the pallet (see the figure below).
a. Remove the plastic bag containing two bolts that is stapled to the
front of the pallet. Remove the two bolts from the bag.
Figure 2–2 Installing the Ramp Onto the Pallet