StorageTek L180, Руководство по обслуживанию

Страница: 87 / 266

95897 Fifth Edition 3-19
Diagnostic Tests
■
Diagnostic Tests
Diagnostic tests simulate online library operation. These tests must be run only
when the target mechanisms are
offline
.
For example, if the test exercises only the robot and does not affect any drives
(as in the Get-Put diagnostic test), only the library must be offline. If, however,
you want to mount a cartridge to a drive (Mount-Dismount diagnostic test),
both the library
and
drive must be offline.
The Get-Put Loop and Mount-Dismount diagnostic tests are used to check
library and drive operation.
Diagnostics Menu
The Main Diagnostics Menu lets you perform these functions:
• Drive-related functions:
- Clean Drive: Enables you to clean tape drives manually
- Mount: Inserts a test cartridge into a drive
- Dismount: Removes a test cartridge from a drive
- Run Drive Check: Determines if the DLT 8000, 9840, or T9840 Tape
drive is functioning
- Mount-Dismount Loop: Inserts a test cartridge into and removes it from
a drive. (You may designate the number of times the library goes
through the loop.)
• Get-Put Loop: Gets a test cartridge and puts it in another location. (You
may designate the number of times the library goes through the loop.)
• Demo Mode: Simulates library operation
Figure 3-1 shows an example of a diagnostic screen.
Figure 3-1. Main Diagnostics Menu
MAIN DIAGNOSTICS MENU:
DRIVE DIAGNOSTICS
GET/PUT LOOP
DEMO MODE