StorageTek L180, Руководство по обслуживанию

Страница: 113 / 266

95897 Fifth Edition 4-23
Cartridge Access Port Motor
12. Grasp the CAP by the magazine shelf, and pull the CAP off of the top and bottom
alignment pins.
13. Lay the flat side of the CAP on the corner of a flat surface.
14. Use a T-25 Torx bit to remove the cable clamp screw.
15. Open the clamp and remove the CAP motor cable
16. Use a T-15 Torx bit to loosen the two screws that attach the motor to the bracket.
1. Cable clamp screw
2. Motor screws
17. Slide the motor up to release the tension on the belt.
18. Slip the belt off of the pulley.
1. CAP motor
2. Belt
3. Pulley
E67132
1
2
E67133
2
1
3