StorageTek L180, Руководство по обслуживанию

Страница: 56 / 266

Configuration Overview
2-12 Fifth Edition 95897
4. When the screen displays your desired setting, press the
SELECT
button to
save the changes. Press the MENU button to abort.
- If you have already changed the library’s SCSI ID or Port 0 address and
are planning to exit the Main Configuration Menu at this time, you must
press the
RESET
button.
- If you wish to set other configuration values, continue with the next
section.
- If you have not changed the library’s SCSI ID or Port 0 address and are
not setting other configuration values, press the
MENU
button until you
exit all menus.
Setting the Date
The library saves the current date in non-volatile memory.
To set this value:
1. At the Lib Config Menu, press an arrow button until the cursor underscores
DATE
.
2. Press the SELECT button. An editing screen appears.
3. On the editing screen:
a. Use the up and down arrow buttons to select a value for each portion
(field) of the date.
b. Use the
SELECT
button to move right to the next field.
c. Use the
MENU
button to move left to the previous field.
4. When the screen displays your desired setting, press the
SELECT
button
from the right-most field to save the changes. Press the
MENU
button to
abort.
- If you have already changed the library’s SCSI ID or Port 0 address and
are planning to exit the Main Configuration Menu at this time, you must
press the
RESET
button.
- If you wish to set other configuration values, continue with the next
section.
- If you have not changed the library’s SCSI ID or Port 0 address and are
not setting other configuration values, press the
MENU
button until you
exit all menus.