StorageTek L180, Руководство по обслуживанию

Страница: 27 / 266

95897 Fifth Edition xxv
Safety
Replace Components
7. Remove the defective component and place it on the work surface.
8. Remove the replacement component from its ESD-protective package, and
install the component in the equipment.
9. Place the defective component in the ESD-protective package.
Clean Up
10. Disconnect the ground cords from the equipment.
11. Reinstall all equipment covers and close all equipment doors.
12. Disconnect the coil cord from your wrist, and, if necessary, disconnect the
ground cord from the work surface.
13. Properly store the work surface and the other Field Service Grounding Kit
items.
■
Tape Library Safety Features
Safety features are incorporated into the tape library. If the front door is
opened, an electrical interlock removes power from the robot assembly.
Behind the front door, covers are placed over the MPC card, the AC power
supply, and the DC power supply to prevent you from coming into contact with
hazardous voltages and sensitive electronics.
CAUTION:
Confined Space: While reaching inside the library, take care to avoid
bumping your head or catching your clothing on protruding edges.
■
Rack Safety and Precautions
WARNING:
Possible personal injury:
• More than one person might be required to install equipment into the
library’s rack or to remove equipment from the library’s rack.
• Personnel should take adequate precautions when they are moving a
library that contains rack-installed equipment. The weight of some
rack equipment might alter the height of the library’s center of
gravity. This condition might cause the library to tip during a move.