Assembling main parts
Operation & maintenance instructions (Version H)
48
SKY-200/250
2.
If required, fill the spaces with shims (5).
3.
Connect the roll-off safety (6), the drive-off safety (9) and the drive-on ramp (10)
using shafts (7). Lock the shafts with locking rings (8).
4.
For the at the floor mounted version, the fixed drive-on ramp can be mounted. This
ramp consists of two components (11) and (12). Optionally you have to mount
intermediate parts of 50 cm.
5.
Place the separate strip (13) symmetrically at 30 cm from the footplate and fasten
them using anchors (14).
6.
Fasten drive-on part (11) using bolts and washers (15) and (16).
7.
Now place drive-on part (12) at the correct position and determine the correct
position of the strip (13).
8.
Fasten this strip using anchors (14) and fasten the drive-on ramp using bolts and
washers (15) and (16).
Note
n
For wash bay versions all bolted connections must be sprayed with Tectyl Amber
(delivered with the lift).
Figure 4.18
Assembly of drive-on and drive-off ramps
Содержание SKY-200
