Steris InnoWave Pro, Руководство оператора

Страница: 110 / 200

4. Touch OK on the display to confirm recognition that the wash cycle was aborted.
The tank will be drained of fluids and the display will return to the Load
Instruments screen when the tank draining is completed.
5. Instruments inside the sonic irrigator must be processed in a new wash
cycle.
7.9 Wash Cycle Errors
If an unexpected condition occurs, the sonic irrigator will abort the wash cycle, emit
an audible alarm, and an error message will appear on the display with a reason for
the abort. The cycle log will record an error code, a description of the error, and
diagnostic information.
WARNING
When error occurs during wash cycle, load may be contaminated and require
reprocessing. Review cycle log to establish if wash cycle completed before
error. If error interrupted wash cycle, repeat cycle to reprocess load. If error
persists use another unit or alternative cleaning process (according to facility
procedure) and contact equipment supplier to have unit serviced.
1. When an error occurs, an audible alarm is
emitted, and an error code is shown on the
display.
2. The reason for the abort should be investigated
using the reported error code to diagnose the
cause. Follow advice given. See
Diagnosing
Error Codes on page 142.
3. After noting the error code reported, touch
OK
on the display to confirm that the
error has been recognized.
100 PERFORMING A WASH CYCLE
InnoWave Pro Sonic Irrigator Operator Manual