Steca PA 15, Руководство по эксплуатации

Страница: 4 / 40

1 Introduction
Congratulations on your purchase!
The Steca PA15 TTS remote switch for the Solarix TAROM charge
controller is a future-oriented device which can used to realise many
power management functions in a fast and uncomplicated way.
This device can be used for the following functions in your solar-powered
standalone network with system voltages of 12V, 24V and 48V:
¾
Realise decentralised, priority-led power management,
¾
Integrate into your system additional solar module arrays and
other add-on generators such as wind or water (relay or
contactor required as the switch element),
¾
Activate one or more excess consumers automatically (start
signal output),
¾
When the battery begins an exhaustive discharge, start an
emergency generator to recharge your battery (start signal
output),
¾
Or create an automatic nightlight.
2 Safety instructions and damage exclusions
Steca GmbH and it suppliers cannot accept any liability for any damage or
losses arising as a result of the use of this manual.
Steca GmbH and it suppliers cannot accept any liability for any damage,
losses or third party claims arising as a result of the use of the Steca PA15
TTS remote switch.
Steca GmbH and it suppliers cannot accept any liability for any damage or
losses arising as a result of malfunctions, empty batteries or repair work.
2.1 Symbols used for safety instructions
Safety instructions for personal protection are marked in this manual with
the
symbol and are printed in bold.
Notes relating to the functional safety of the system are printed in bold.
Safety instructions from manufacturers of additional components
connected to this remote switch must be observed. This manual must not
be used as a replacement for such instructions. In the event of any
discrepancy between the different manuals, please contact your specialist
dealer.
PA15 TTS Operating Manual Page 4