Steca PA 15, Руководство по эксплуатации

Страница: 27 / 40

4.7 Nightlight (NIGHTLIGHT)
4.7.1 What does this mean?
When the TAROM charge controller detects night using the solar
modules connected, or no longer detects any solar current, it
transmits the night signal to the PA15 TTS remote switch
connected. The remote switch(es) connected, which are configured
for nightlight functions, will then switch on their load output. When
the solar generator supplies current again when daylight breaks, the
TAROM stops transmitting the night signal which reactivates the
PA15. Multiple lamps can be connected to the load output on a
PA15, assuming the max. load current is not exceeded and an
automatic nightlight is created using multiple PA15s at different
locations in your standalone network.
The Solarix TAROM / POWERTAROM has a few additional settings
to control the nightlight function. The corresponding configuration
menu in the charge controller can be used to set a delayed start
once night has been detected by the Tarom. In addition, the
duration of the nightlight function can be restricted.
More information on the precise setting options can be found in the
operating and installation instructions for the Solarix TAROM /
POWERTAROM.
However, do bear in mind that this creates short delays in switching
functions in relation to the night detection feature by the Tarom. The
cause of this is related to the transmission security program and
provides safe detection and switching.
-
-
Button or switc hr
+
-
-
Solar module Tarom c ontroller
15 A
A+ A- S S L+ L-
Solar
Manager
Exc ess
SOC
Manager
Nightlight Buzzer
PA 15
Battery wires
Load
+
+
+
PA15 TTS Operating Manual Page 27