Steca PA 15, Руководство по эксплуатации

Страница: 25 / 40

If the data transfer is interrupted or not activated in the Tarom, the
output remains or becomes shutdown, thus protecting the generator
against overload.
If the data transfer is interrupted, a switch can be used to switch the
output (generator) on or off manually.
The buzzer does not indicate an interruption in the data transfer.
4.6 Excess management (excess)
4.6.1 What does this mean?
If there is an excess of solar power available and the battery is
already fully charged, the power generated can be used by an
excess consumer device (e.g. water pump). The TAROM switches
on the excess consumer via the PA15 when the battery is fully
charged, before the solar current in the battery is shut off.
4.6.2 How to do this
1. Connect the PA15 to your battery leads with the correct polarity (A+
/ A-).
2. Connect the consumer device to the outputs (L+ / L-) with the
correct polarity.
-
-
Button or switc h
Exc ess c onsum err
(Relay)
+
-
-
Solar m odule
Tarom c ontroller
15 A
A+ A- S S L+ L-
So lar
Mana ger
Excess
SOC
Manager
Nightlig ht Buzzer
PA 15
Battery wires
Load
+
3. To configure the PA15 for this operating mode, plug in the
“EXCESS” jumper.
Nightlight
Buzzer
SOC
Manager
Solar
Manager
Excess
PA15 TTS Operating Manual Page 25