Status SOLID 300, Руководство пользователя

Страница: 45 / 56

45
2.2.1. ATTACH THE STATUS STIKI
DOUBLE-SIDED ADHESIVE TAPE
a.) Clean the area where Status Stiki tape will be
attached with alcohol or acetone.
b.) Peel off one side of the double-sided tape and
attach it to the cleaned surface. Press firmly to allow
for the glue to adhere.
c.) Peel off the upper side of the tape. Stiki is now
ready for use.
d.) The vacuum bag adheres to the Stiki tape and stays
in place throughout the process of vacuum packing.
e.) Removal: When Stiki gets dirty or no longer adhe -
res to the bag, remove it manually and attach a new
one following the procedure described above. The
double-sided Status Stiki tape does not leave marks
on the machine.
2.1. GENERAL INSTRUCTIONS
a.) When removing the machine from the packaging,
make sure that all the components are included
and that the machine and its accessories are in
pristine condition.
b.) It is essential that you read the User Manual
before first use.
c.) Place the machine on a level smooth surface with
enough room to allow for placing foodstuffs into
the bags.
2.1.1. LATCH LOCKING SYSTEM
The system can be set in two positions:
• Lock-free mode is used for automatic vacuum
packing function. You need to press in the bot -
tom centre part of the lid in the beginning of the
vacuum packing process until you notice change
in the vacuum bag.
• Locked mode is used with manual vacuum
packing function and for sealing the bag when
forming bags out of foil rolls. You need to lock
the lid by pressing on the right and left corner
of the lid before starting the process of vacuum
packing/sealing. At the end of those processes,
you need to press the buttons to unlock the lid.
In order to switch from locked to lock-free mode,
press the button and push the latch forward. For
switching back to locked mode, push the latch back -
ward.
Figure 2:
Latch locking system.
2.2. PREPARING THE MACHINE FOR USE
2. USE
LOCK-FREE
LOCKED
Figure 3: Adhere Status Stiki tape under the Sealing
Strip.