Standard Horizon QUANTUM GX6000E страница 188 Скачать руководство пользователя

Страница: 188 / 194

Page 188

GX6500E/GX6000E

23 WARRANTY

PLEASE NOTE

To receive warranty service in Europe, for European Sourced products,

the purchaser must return the Product, shipment and insurance prepaid

to the purchasing dealer or authorized Service Centre in Europe. Contact

details for warranty in Europe are available from the dealer in your country

or from www.standardhorizon.co.uk where details of warranty terms and

contact details for Europe can be obtained.

STANDARD HORIZON LIMITED WARRANTY

STANDARD HORIZON (the Marine Division of Yaesu Musen Co. Ltd) warrants,

to the original purchaser only, each new Marine Product (“Product”) manufac-

tured and/or supplied by STANDARD HORIZON against defects in materials

and workmanship under normal use and service for a period of 3 years from

the date of purchase.
In the event of a defect, malfunction or failure of the Product during the warranty

period, STANDARD HORIZON’s liability for any breach of contract or any

breach of express or implied warranties in connection with the sale of Products

shall be limited solely to repair or replacement, at its option, of the Product or

part(s) therein which, upon examination by STANDARD HORIZON, appear to

be defective or not up to factory specifications. STANDARD HORIZON may, at

its option, repair or replace parts or subassemblies with new or reconditioned

parts and subassemblies.
STANDARD HORIZON will not warrant installation, maintenance or service of

the Products. In all instances, STANDARD HORIZON’s liability for damages

shall not exceed the purchase price of the defective Product.
STANDARD HORIZON will pay all labor and replacement parts charges incurred

in providing the warranty repair service except where purchaser abuse or

other qualifying exceptions exist. The purchaser must pay any transportation

expenses incurred in returning the Product to STANDARD HORIZON for service.
This limited warranty does not extend to any Product which has been subjected

to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD

HORIZON, improper installation, or subjected to use in violation of instructions

furnished by STANDARD HORIZON, nor does this warranty extend to Products

on which the serial number has been removed, defaced, or changed. STAN-

DARD HORIZON cannot be responsible in any way for ancillary equipment not

furnished by STANDARD HORIZON which is attached to or used in connection

Содержание QUANTUM GX6000E



































































































































































































Результаты поиска

Содержание QUANTUM GX6000E

Отзывы:

Похожие инструкции для QUANTUM GX6000E

Бренды по названию

Популярные бренды

Standard Horizon QUANTUM GX6000E, Руководство пользователя

Результаты поиска

Содержание QUANTUM GX6000E

Отзывы:

Похожие инструкции для QUANTUM GX6000E

Бренды по названию

Популярные бренды