Page 21
GX6500E/GX6000E
5.6.4
NMEA 0813/NMEA 0183-HS to Chart Plotter
4800 Baud Connections
GPS Chart Plotter
Plotter Connection
Radio Wires
Gray: NMEA OUT ( )
Brown: NMEA OUT ( )
Yellow: NMEA-HS OUT ( )
White: NMEA-HS OUT ( )
Blue: NMEA IN ( )
No Connection
No Connection
NMEA IN ( )
NMEA
IN
-HS ( )
NMEA IN ( )
NMEA
IN
-HS ( )
Green: NMEA IN ( )
GPS Antenna
Wire Color/Description
Connection Examples
BLUE - NMEA GPS Input (+)
No connection
GREEN - NMEA GPS Input (−)
No connection
GRAY - NMEA DSC Output (+)
NMEA (+) input of GPS*
1
BROWN - NMEA DSC Output (−)
NMEA (−) input of GPS*
1
YELLOW - AIS Data Output (+)
NMEA-HS (+) input of AIS receiver*
2
WHITE - AIS Data Output (−)
NMEA-HS (−) input of AIS receiver*
2
*1: 4800 baud
*2: 38400 baud
Note
: Some GPS chart plotters have a single wire for NMEA signal ground. In such a case connect
the NMEA input (−) to the GPS chart plotter’s single NMEA signal ground wire, and leave the NMEA
output (−) open. In case the assignment of power supply and ground of a GPS chart plotter to be
used is different from that of the radio, connect the signal ground wire of the GPS chart plotter to
the ground terminal (GND) on the rear panel of the radio.
