manualshive.com logo in svg

Standard Horizon QUANTUM GX6000E, Руководство пользователя

Поделиться
Скачать
Standard Horizon QUANTUM GX6000E Скачать руководство пользователя страница 8

Page 8

GX6500E/GX6000E

4.4 

COAXIAL CABLE

VHF antennas are connected to the transceiver by means of a coaxial cable 

– a shielded transmission line. Coaxial cable is specified by it’s diameter and 

construction.
For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. 

For runs over 20 feet but less than 50 feet, the larger RG-8X or RG-213/U should 

be used for cable runs over 50 feet RG-8X should be used. For installation of 

the connector onto the coaxial cable refer to the figure below.

To get your coax cable through a fitting and into your boat’s interior, 

you may have to cut off the end plug and reattach it later. You can do 

this if you follow the directions that come with the connector. Be sure 

to make good soldered connections.

4.5 

DISTRESS AND HAILING (CHANNEL 16)

Channel 16 is known as the Hail and Distress Channel. An emergency may be 

defined as a threat to life or property. In such instances, be sure the transceiver 

is on and set to CHANNEL 16. Then use the following procedure:
1.  Press the microphone push-to-talk switch and say “

Mayday

, 

Mayday

, 

Mayday

. This is            ,            ,            ” (your vessel’s name).

2.  Then repeat once: “

Mayday

,            ” (your vessel’s name).

3.  Now report your position in latitude/longitude, or by giving a true or magnetic 

bearing (state which) to a well-known landmark such as a navigation aid 

or geographic feature such as an island or harbor entry.

4.  Explain the nature of your distress (sinking, collision, aground, fire, heart 

attack, life-threatening injury, etc.).

5.  State the kind of assistance your desire (pumps, medical aid, etc.).

6.  Report the number of persons aboard and condition of any injured.

7.  Estimate the present seaworthiness and condition of your vessel.

Содержание QUANTUM GX6000E



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды