manualshive.com logo in svg

Standard Horizon QUANTUM GX6000E, Руководство пользователя

Поделиться
Скачать
Standard Horizon QUANTUM GX6000E Скачать руководство пользователя страница 102

Page 102

GX6500E/GX6000E

NOTE

After the radio receives a test call reply from the vessel that was called, 

the radio will ring and show “

RX TEST CALL

” display, which confirms 

the radio you called has received the test call.

9.10.3  Receiving a DSC Test Call

When another vessel transmits a DSC Test call to the 

GX6500E/GX6000E

 the 

following will happen:
1.  When a DSC Test call is received, the radio will auto-

matically respond to the calling vessel.

2.  To exit from the DSC Test call display, press the 

[QUIT]

 

soft key.

9.11  DSC LOG OPERATION

The 

GX6500E/GX6000E

 logs transmitted calls, received DSC distress calls, 

and other calls (individual, group, all ships, etc.). The DSC log feature is similar 

to an answer machine where calls are recorded for review and a “ ” icon will 

appear on the radios display. The 

GX6500E/GX6000E

 can store up to 100 

transmitted calls, up to the latest 50 distress calls, and up to the latest 100 

other calls (individual, group, all ships, position report, position request ack, 

test call ack, and polling calls).

NOTE

When the “

DSC LOG

” menu is selected, the 

GX6500E/GX6000E

 may 

display high-priority logged call automatically.

9.11.1  Reviewing and Resending a Transmitted Logged Call

The 

GX6500E/GX6000E

 allows transmitted logged calls to be reviewed and 

to resend the call.
1.  Press the 

MENU

 key to display “

MENU

”.

2.  Rotate the 

DIAL/ENT

 knob to select “

DSC CALL

”, then 

press the 

[SELECT]

 soft key.

Содержание QUANTUM GX6000E



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды