manualshive.com logo in svg

Standard Horizon QUANTUM GX6000E, Руководство пользователя

Поделиться
Скачать
Standard Horizon QUANTUM GX6000E Скачать руководство пользователя страница 47

Page 47

GX6500E/GX6000E

7.9.2 

Operation

1.  Press the 

►

/

◄

 key repeatedly, then press the 

[PRESET]

 soft key to recall the preset channel. The 

“

[P-SET]

” icon will appear on the display.

2.  Rotate the 

DIAL/ENT

 knob to select the desired preset 

channel.

3.  Press the 

[PRESET]

 soft key to return to the last 

selected channel. The “

[P-SET]

” icon will disappear 

from the display.

7.9.3 

Deletion

1.  Press the 

►

/

◄

 key repeatedly, then press the 

[PRESET]

 soft key to recall the preset channel.

2.  Rotate the 

DIAL/ENT

 knob to select the preset chan-

nel to be deleted.

3.  Press and hold the 

[PRESET]

 soft key until the 

“

[P-SET]

” icon and channel number are blinking.

4.  Press the 

[DELETE]

 soft key to delete the channel 

from the preset channel memory.

5.  Repeat steps 2 through 4 to delete the desired chan-

nels from preset channels.

6.  To exit from deleting the preset channels, press the 

[QUIT]

 soft key.

7.10  MOB OPERATION

The 

GX6500E/GX6000E

 provides a feature to memorize the position informa-

tion instantly in case of MOB (Man Over-Board).
1.  Press the 

►

/

◄

 key repeatedly, then press the 

[MOB]

 

soft key.

2.  Press the 

[TO WPT]

 soft key to start the navigation to 

the displayed position. For details about the naviga-

tion, see section “

11 NAVIGATION

”.

 

To modify the displayed position information, press the 

[POS/TM]

 soft key. For details about the modification, 

see “

Editing a Waypoint

” on page 111.

Содержание QUANTUM GX6000E



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды