Standard Horizon QUANTUM GX6000E, Руководство пользователя

Страница: 127 / 194

Page 127 GX6500E/GX6000E
12.2 AIS OPERATION
The GX6500E/GX6000E is equipped with an AIS receiver and can display AIS
targets around your vessel on the radios display. Therefore, you can identify
and avoid other large vessels nearby your vessel.
NOTE
To show AIS targets on the radio’s display, the SCU-31 or external GPS
needs to be fixed own location so the radio knows its position relative
to the AIS targets.
1. Press the MENU key to display “ MENU ”.
c
2. Rotate the DIAL/ENT knob to select “ AIS ”, then press
the [SELECT] soft key.
Vessel Location
AIS Target Range Ring
The AIS display shows your vessel as a “ ” icon in
the center of the display. AIS targets are shown as
triangles. The line projected from the circle is the AIS
vessels course over ground (COG).
3. Press the ► / ◄ key to change the AIS target. Pressing
the ◄ key sequentially displays AIS vessels in order
closest to your ship. Pressing the ► key sequentially
displays AIS vessels in order furthest from your ship.
＜ AIS ＞
Selected AIS Target
Information
of the AIS Target
The selected AIS target is displayed with “ ” icon,
while other stations are displayed with “ ” icon.
Note
: Up to 15 AIS targets can be shown on the
display.
4. Press the CLEAR key to return to radio operation.
12.2.1 Displaying the AIS Target Information Screen
1. On the AIS screen, press one of the soft keys to show
the key selections. These selections are described
below:
[RANGE] : Press this key to change the display range
of the screen.
[TG LIST]
: Press this key to show a list of the MMSI
numbers or the vessel names being
received.