Standard Horizon CPF180I, Руководство пользователя

Страница: 50 / 166

Page 52 CPF180i and CPF300i
8. Move the ShuttlePoint knob up/down to highlight the desired Point Of Interest and press [ENT] .
9. Another window will be shown with detailing the Point Of Interest information.
10. Press
[CLR] to show the actual position of the Point Of Interest on the chart page.
11. Press [CLR] again at any time to return your cursor to your vessels position.
WAAS 3D
WAAS 3D
I N F OR I
Figure 4.0.7 - Find Points Of Interest
4.0.8 User Points
This feature is used to search for User Points (Marks and Waypoints you have created
and stored) by name quickly and efficiently.
1. Press
[FIND] .
2. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the
ShuttlePoint knob to the right.
3. The (Select Name) popup window will appear. This window will allow you to enter in the
name of the User Point you wish to locate.
4. Move the ShuttlePoint knob up/down to change each number or letter and left/right to
move to the next or previous position in the name of the Mark.
5. Once the name of the desired Mark reads in the (Select Name) window, press [ENT]
to show the location the Mark on the Chart page.
6. Press [CLR] at any time to return your cursor to your vessels position.
WAAS 3D
I N F ORM
Figure 4.0.8 - Find User Points (Marks and Waypoints)
4.0.9 Coordinates
This feature allows you to enter Coordinates (Latitude/Longitude) and view the entered
position on the Chart Page.