Standard Horizon CPF180I, Руководство пользователя

Страница: 45 / 166

CPF180i and CPF300i Page 47
4. Move the ShuttlePoint knob to highlight the desired Tide Station and press [ENT] .
5. Another window will be shown detailing the selected Tide Station information.
6. Press
[CLR] to show the actual position of the Tide Station on the Chart Page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
WAAS 3D
Figure 4.0.2 - Tide Stations
2
1
3
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time (3) displayed corresponds to the location of the cross-
hair cursor (2) in the Tide Graph (1). Moving the ShuttlePoint knob to the left or right changes
the time, and moving the ShuttlePoint knob up or down selects the Tide height and Tide
draught on the Tide Graph.
NOTE
The Local Offset matchs the Time Offset entered in the Time Setup menu (see Par. 3.2)
4.0.3 Wrecks
This feature is used to locate the 10 nearest Wrecks to the position of your vessel. A Wreck
is represented with an icon on the chart. See the following table:
non - dangerous wrec k
dangerous wrec k
distributed remains of wrec k
wrec k showing mast / masts
wrec k showing any portion of hu ll or superstructure
I CON D E SCR I PT I ON
Masts
#
F o u l
Figure 4.0.3 - Wreck icons Table