Standard Horizon CP180, Руководство пользователя

Страница: 93 / 138

GPS Chart Plotters Page 95
R
3. Move the ShuttlePoint knob up or down to select the desired item within the groups
Marine Settings, Depth Settings, Land Settings, Chart Settings or Underwater Settings
and press
[ENT] . See the above sections for details on selections.
12.2 NAVIGATION PAGE
This page is useful to show information when heading to a destination, following a compass
heading or navigating to a Mark or a Route. The default page is shown with a Compass
Rose, however this can be customized to show a Compass Tape.
1. To change to show the Compass Tape, select the Chart page, press [MENU] . Move the
ShuttlePoint knob to highlight SETUP MENU and press [ENT] .
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] and press
[ENT] or move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight NAVIGATION PAGE and press [ENT] and
press [ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint up or down to select COMPASS TAPE and press [ENT] .
6. Press [CLR] or move the ShuttlePoint knob to the right until the Chart page is shown.
4
F ix position
2
Bearing to Destination
T ime
1
3
Speed O v er Ground
Course O v er Ground
5
1
3
4
2
8
W AAS 3D
5
T ime T o Go
6
6
7
Distance to Destination
7
Compass Rose
8
Figure 12.2 - Navigation page with Compass Rose
W AAS 3D
T ime T o Go
4
F ix position
2
7
Compass T ape
T ime
1
6
3
8
Speed O v er Ground
Course O v er Ground
Bearing to Destination
5
1
3
4
2
5
6
8
7
Distance to Destination
Figure 12.2a - Navigation page with Compass Tape