Standard Horizon CP180, Руководство пользователя

Страница: 81 / 138

GPS Chart Plotters Page 83
R
11. USER C-CARD
The optional User C-CARD is used to back up Marks, Routes, and Tracks stored in your
GPS Chart Plotter's memory. In the USA the User C-CARD is available directly from
Jeppesen Marine at 800/424-2627. The User C-CARD is similar to a back up disk used with
a PC, in case you have to clear the RAM to resolve an issue or load new software or if your
CP180/CP180i and CP300/CP300i becomes stolen, or if you would like to transfer
Waypoint, Track and Route information from one STANDARD HORIZON GPS Chart Plotter
to another.
11.0 USER C-CARD MENU
This optional card is similar to using a floppy disk or memory stick on a PC to backup your
files or to transfer the information that you have stored to a friends GPS Chart Plotter. The
information shown below will assist you to transfer the User Points, Routes and Track
history to the optional User C-CARD.
1
2
3
4
5
6
T ype of data contained in the
fi l e (Mark fi l e, Waypoint fi l e ... )
F i l e name
Number of Se l ected fi l e
I nformation on stored U ser
Points on I nterna l Memory
T ime of fi l e creation
Date of fi l e creation
4
5
2
1
3
6
Figure 11.0 - User C-CARD Menu
11.0.0 Formatting the User C-CARD
1. Press [MENU] . Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT] .
3. Move the ShuttlePoint knob to highlight FORMAT and press [ENT] .
4. A popup Warning window will to confirm you want to format the User C-CARD.
5. Select
YES and press [ENT] to confirm (select NO otherwise). The format of User
C-CARD must be done before using a new User C-CARD: this operation prepares the
User C-CARD to receive and store information.
NOTE
Formatting permanently erases all files previously saved on the User C-CARD.
11.0.1 Transferring files to the optional User C-CARD
1. Remove a
C-MAP B
Y
J
EPPESEN
NT +
/MAX
C-CARD if present and insert the optional
User C-CARD into the slot.