Standard Horizon CP180, Руководство пользователя

Страница: 115 / 138

GPS Chart Plotters Page 117
R
16.4.0 Delete PTX
The Delete PTX function permanently removes the selected PTX from the MOBILARM
Alarm Status List and from the Chart page.
Using the ShuttlePoint knob, move the cursor over the PTX icon and then:
ON
CP180/CP180i
press [ENT] , select DELETE using the ShuttlePoint knob and press [ENT] . A warning
popup window will be shown. Select YES and press [ENT] .
ON
CP300/CP300i
press [D
ELETE
] A warning popup window will be shown. Select YES and press [ENT] .
16.4.1 Goto PTX
When Goto is selected on the GPS Chart Plotter, navigation will start to the PTX icon
location. After the GPS Chart Plotter has received a PTX MOB alarm, using the ShuttlePoint
knob move the cursor over the PTX to navigate to and then:
ON
CP180/CP180i
press [ENT] , select GOTO using the ShuttlePoint knob and press [ENT] .
Figure 16.4.1 - Example of Goto PTX on CP180/CP180i
ON
CP300/CP300i
two Soft Keys under the display will be shown:
a. [G
OTO
] , when pressed will start navigating to the PTX MOB location
b. [L
IST
] , when pressed will show the MOBILARM Alarm Status List page. Refer to Par.
16.4.2 for Alarm Status List.
Figure 16.4.1a - Example of Goto PTX on CP300/CP300i
If the navigation is set to the selected PTX icon, to terminate the navigation: