Standard Horizon CP180, Руководство пользователя

Страница: 61 / 138

GPS Chart Plotters Page 63
R
7. CREATING MARKS
Definitions:
MARK
Can be a stand alone position or be linked to a Route. A Mark is place on the Chart page using
[MARK] or by entering in information in the MARK/WAYPONTS List NEW MARK selection.
WAYPOINTS
Always linked to a Route. Are placed on the Chart page using [ROUTE] .
NOTE
The difference between a Mark and a Waypoint is
a. When a Route is created using WAYPOINTS and the ROUTE is deleted the WAYPOINTs are
also deleted.
b. If a Route is created using MARKS and the ROUTE is deleted the MARKs remain.
7.0 CREATING A NEW MARK USING THE CHART PAGE
1. Move the ShuttlePoint knob to the desired or approx. Lat/Lon and press [MARK] .
2. You will notice a Mark is placed under the location of the cursor and a popup window
is shown with the exact Lat/Lon of the Mark.
3. If the position is incorrect on the CP180/CP180i press [ENT] , select EDIT using the
ShuttlePoint knob and press [ENT] . On the CP300/CP300i, press [E
DIT
] that will allow
you to change the position, Mark name and icon type.
Vesse l l ocation
Mark p l aced under Cursor
Lat / Lon of Mark, DS T/ BRG
from v esse l l ocation
2
1
4
ON LY for CP 300/300i
Press Soft K ey to sho w
, to edit,
to mo v e or to de l ete Mark
the
Marks / Waypoint List
5
ON LY for CP 180/180i
Press [ EN T] to de l ete, to mo v e,
to edit a Mark or to sho w the
Marks / Waypoint List (Directory)
3
1
2
4
5
3
Figure 7.0 - Mark creation
NOTE
After entering in all the Marks it is a good practice to back up the points to an User C-CARD. Refer
to Section 11.
7.1 EDITING A MARK
If a Mark has previously been created and you wish to Edit it, move cursor over the top of
the Mark.