48
This document is written and published by ShockWatch, Inc. All rights reserved.
USER MANUAL
SLOT GRAPH SELECTION
When a data file is first opened, the report tab will display four time slot graphs, usually X, Y & Z acceleration and
Internal Temperature. These values will vary depending on what was selected for the recorded period.
To view any of the alternative channels of information recorded during this file, the user can change the
display selection.
However, a maximum of four graphs can be displayed at any given time. If a user needs to view more than four, it
is necessary to go to the Slots Tab where all recorded time slot parameters can be viewed.
To change the selected Graphs, select the arrow of the ‘Select Slot’ drop down menu. A list of all the available slot
graphs that have been recorded in the data file and the four graphs currently being displayed will be checked. To
change the selection, uncheck the graphs no longer of interest and check those that should be displayed.
When the desired channels have been selected, the report will automatically update and display the revised charts.
Click on the arrow to go back to the report.
The display can be changed as many times as desired and the various versions can be printed for the record.
