113
APPENDIX C - SPOTSEE PLATFORM
This document is written and published by ShockWatch, Inc. All rights reserved.
ALARMS/SUMMARIES
UNIT INFORMATION TABLE
On the right side of the asset page is the list of alarms and summaries for
the unit. The alarm shows the axis as well as the value recorded on the
axis. Summaries show the total number of alarms reported. If the ShockLog
Satellite is in an area where it cannot communicate with the satellites,
then the summary alarm count will alert users that an alarm has not been
transmitted to the cloud and that the ShockLog should be downloaded at
the end of the journey for details regarding any missed alarms.
It is possible to turn off summaries (or alarms) from the cloud view. When
doing so, summaries (or alarms) will be removed from the map and the list.
The trip path is traced by default in the SpotSee cloud. If you do not wish to
see the journey path, you may remove the Lines from the map.
Click on the item at the bottom of the alarm list to turn parameters off or
on. The parameter that has been turned off will change to a gray color.
Below the map, a snapshot of information regarding the ShockLog Satellite is displayed. The Alarm Count summarizes
the number of alarms in the selected time range. The Time Since Last Message is a quick way to determine when the
last communication from the ShockLog Satellite has been. From this time, you can determine if a device has been
turned off or has a potential connectivity issue.
It may be desirable to turn off summaries when loading large amounts of data as this will speed the load process.
However, you will no longer see all of the trip segments on the map.
