Spirax Sarco RIM20 Скачать руководство пользователя страница 65

Страница: 65 / 132

IM-P198-05

MI Issue 2

4.13 Time and date menu

Use the Time and Date Menu to enter the correct time and date into the flowmeter’s memory.

The parameters are used in the Run mode and the alarm and system log files.

Note: Time is displayed in AM/PM format, but military format is used to set the time.

For example, 1:00 PM is entered as 13:00:00 in the Set Time menu.

Example for setting the time

How to set the time to 12:00:00. You can check the time in the Run mode by pressing the

keys until the Time & Date screen appears. Note: all outputs are disabled while using the

Setup Menus.

Use

ïð

keys to move to the Time and Date Menu.

Press key until Set Time appears. Press ENTER.

Press

key until 1 appears. Press

key to move the underline cursor to the next digit.

Press the

key until 2 appears. Continue sequence until all desired parameters are

entered.

Press ENTER to return to the Time and Date Menu.

Press EXIT to return to the Run mode.

Содержание RIM20





































































































































Результаты поиска

Содержание RIM20

Отзывы:

Spirax Sarco RIM20, Инструкция по установке и обслуживанию, Страница: 65 / 132

Результаты поиска

Содержание RIM20

Отзывы: