Spirax Sarco RIM20, Инструкция по установке и обслуживанию, Страница: 59 / 132

IM-P198-05 MI Issue 2 59
Example for setting an alarm
The following shows how to set the totalizer to track mass flow in kg/sec. (All outputs are
disabled while using the Setup Menus.)
First, set the desired units of measurement:
1.
Use
ïð
keys to move to the Units Menu.
2.
Press
ò
key until Mass Flow Unit appears. Press ENTER.
3.
Press
ò
key until kg appears in the numerator. Press
ò
key to move the underline cursor
to the denominator. Press the
ò
key until sec appears in the denominator. Press ENTER
to select.
4.
Press
ñ
key until Units Menu appears.
Second, set the pulse output:
1.
Use
ïð
keys to move to the Totalizer Menu.
2. Press the
ò
key until Totaling appears.
3. Press ENTER and press the
ò
key to select Mass. Press ENTER.
4.
Press
ò
key to set the pulse output in the units you have selected for mass flow of kg/sec.
Press ENTER and use
ñòïð
keys to set the pulse value equal to the maximum flow in
the same units per second. Press ENTER.
5.
To reset the totalizer, press
ò
key until Reset Total? appears. Press ENTER and the key
to reset the totalizer if desired. Press ENTER.
6. Press the EXIT key and answer YES to permanently save your changes.