Fig. 4.9: MTI10/MTL10 Menu Tree - Diagnostic Tests Menu
ZERO PIPE TEST
VER SET PRM EXIT
SET ZRO Ref?
YES NO
VERIFY ZRO?
YES NO
Level 1
Process Zero and
Stable? EXIT YES
Verifying ZRO
Diff=x.xx T=xx
Diff=x.xxx %
Pass OK
Process Zero and
Stable? EXIT YES
Setting ZRO ref
ZR=x.xxxxx T=xx
Ref=x.xxxx
OK
Level 2
Display
alternates
between
the 2
screens
Displays count
down timer
(T=xx)
Displays
“Pass” or
“Fail”
Test=300 sec
CHG OK
ZERO CHK MENU
PIP BTL EXIT
DIAGNOSTIC
CALV ZRO EXIT
Verifying CAL-V
Cal=xxx T=yyy
Verifying CAL-V
Please Wait
CAL-V=0.51
Pass OK
Display alternates
between the 2
screens until the
test is completed
in about 4
minutes. Pressing
the F4 key will
abort the test
“Pass” or ”Fail”
result is displayed
at end of test.
CAL
VER EXIT
Flo:Go to zero
NXT EXIT OK
Hold Value
Go to zero
Take Control
off-line EXIT OK
Level 2
Level 1
Verifying ZRO
Sd=x.xe-xx T=xx
ZERO BTL TEST
VER EXIT
VERIFY ZRO?
YES NO
Level 1
Process Zero and
Stable? EXIT YES
Verifying ZRO
Diff=x.xx T=xx
Diff=x.xxx %
Pass OK
Display
alternates
between
the 2
screens
Displays “Pass” or
“Fail”
Verifying ZRO
Sd=x.xe-xx T=xx
Flow Parameter 1 Menu, p. 58
61
Operation
Section 1
Operation: Menu Tree
Diagnostic Tests
Menu