SK375-AT3
Driving
Truck
4-16
SPIERINGS MOBILE CRANES USER MANUAL V 0.0
Nov
2
0
1
4
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
4
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
By pushing the gear lever forward (+) or backward (-) over a short distance, one higher gear or one
lower gear can be chosen. This should be in the safe range of engine speed etc. Otherwise the
gearbox will not perform the specified command.
By pushing the gear lever forward (+) or backward (-) over a maximum distance, two higher gears or
two lower gears can be chosen.
Accelerating
When accelerating, the gearbox will automatically switch. When speeding up quickly, the gearbox will
sooner skip gears and the fuel consumption will be less economic.
Braking
After braking and continue driving at a lower speed, the gearbox determines the correct gear based on
speed, engine speed and the position of the accelerator (
The vehicle can be stopped in any gear. At a brief stop (such as at a traffic light), the acceleration
remains switched on.
4.5.4.
Manual mode
After starting the diesel engine (
§
) the gearbox will be in the
automatic
mode
as default.
By pushing the gear lever to the left, there can be switched between
automatic
and
manual
mode
.
If the gearbox is in
automatic mode
, the
display gearbox
shows
the number of the current gear.
The horizontal beams and arrow heads are (partly) disappeared.
By pushing the gear lever forward (+) or backward (-) over a short distance, one higher gear or one
lower gear can be chosen. This should be in the safe range of engine speed etc.
Otherwise the gearbox will not perform the specified command.
By pushing the gear lever forward (+) or backward (-) over a maximum distance, two higher gears or
two lower gears can be chosen.
