SK375-AT3
Driving
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.0
4-7
Nov
2
0
1
4
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l
e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
4
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
5. Press the
brake pedal
;
6. Check if the
brake lights (8)
light up
;
7. Enable the hazard warning lights by using switch
hazard warning lights
;
8. Check if the
direction indicators (10)
light up
;
9. Enable the
main beam
by using the
control lever left
on the steering column;
10. Check if the
main beam (11)
lights up
;
11. Enable the rotaflares by using switch
rotaflares
;
12. Check if the rotaflares
(12)
light up.
4.4.
Start diesel engine truck
4.4.1.
CHECKLIST: Start diesel engine
CAUTION!
If a trailer is attached to the rear of the vehicle, the trailer lighting must be checked
as well.
For more information, see the documentation related to the trailer.
CAUTION!
The issues in this checklist are just briefly explained.
For further information, procedures and safety regulations, see the related
paragraph.
CAUTION!
Not following the start instructions may lead to damage of the starter motor.
CAUTION!
The maximum duty cycle of the starter motor is 30 seconds. If the starter motor will
not turn during this time, let the starter motor cool-down for at least 2 minutes.
Operate the starter motor continuously (up to 30 seconds) till the starter motor
starts. When the starter motor is still not running during this time, then let the
starter motor cool-down for at least 30 minutes before repeating the procedure.
TOXIC SUBSTANCES!
Do not let the diesel engine run in an enclosed or unventilated space because of
risk of choking hazard!
