SK375-AT3
Introduction to the truck
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.3
2-11
©
2
0
1
4
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
J
u
n
2
0
1
6
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
2.6.
Work lamps
At the rear of the engine cowling and at the rear of the truck, there are two work lamps mounted at
each side (left and right). There are also work lamps mounted at the outrigger beams (see also
These work lamps can be operated from the truck cab (see
The work lamps at the rear of the engine cowling can be horizontally adjusted (
).
Follow the next steps for adjusting the work lamps properly:
Turn the
knob A
on the bracket counterclockwise (see
Picture 2-12, point A
);
After adjusting, fix the work lamp by turning the knob clockwise.
2.7.
Storage box
There are storage boxes mounted at both sides of the truck, between the 2
nd
and 3
rd
axle.
2.8.
Storage box fibre glass pads
At both sides of the truck, there are two fibre glass pads placed under the storage boxes.
Use those fibre glass pads to make sure the outriggers are stable at a softer soil.
For more information, see
Crane manual Chapter 5. Crane set-up
.
2.9.
Truck ladder
In order to climb safely on the crane platform, a ladder is mounted at both sides of the truck.
2.10.
Side view camera (optional)
The image of the optional side view camera is displayed on a monitor in the truck cab
.
INFORMATION!
For more information, see
Chapter 4. Driving
Picture 2-12
A
CAUTION!
The work lamps at the rear of the engine cowling must be fully retracted before
driving the vehicle on public roads.
