Sperry Marine Visionmaster FT ECDIS, Руководство пользователя

Страница: 60 / 531

Basic Operation of ECDIS ECDIS User Guide
2-18 65900012
Using the Cursor
Wherever the cursor is displayed on the chart display, a popup Cursor
window, accessed from the lower popup toolbar area gives a readout of the
cursor’s position within the display. By default the Cursor window gives
cursor range and bearing (from own ship) and cursor latitude/longitude, see
Cursor Readout.
Cursor Graphics
When the cursor moves over the system control areas and
popup windows it is displayed as a small white arrow.
When the cursor passes from the control areas into the
chart display it changes to an orange cross.
When the cursor is moved near to the edge of the chart
window it changes from an orange cross to the following
symbol.
When the cursor moves over the dividing line between the
primary and secondary windows in vertical split screen
mode it changes to the following symbol.
When the cursor moves over the dividing line between the
primary and secondary windows in horizontal split screen
mode it changes to the following symbol.
When the cursor moves over the right bottom edge of a
secondary window in secondary presentation it changes to
the following symbol. The window can then be re-sized.
If an adjustable parameter is selected within a control
window, the cursor is displayed as a text entry cursor.
When Select Points is selected from Charts menu the
letters CM are added to the cursor, see Chart Match.
When Pick On is selected from Pick Report menu, or Add
Annotation Mark is selected from Manual Chart Update a
? is added to the cursor